Instruments
For each measurement made, you can enter the instruments that were used during measurement.
These instruments are checked through the parameters:
| • | admin-IN-34177a1b-7a8f-487b-ba4f-48668ea8aafb-1509025661301-70723c4a-0f01-4bfb-92d3-a0cb47967963 |
It indicates only instruments with due date equal to or above measurement date.
| • | admin-IN-34177a1b-7a8f-487b-ba4f-48668ea8aafb-1509025661301-70723c4a-0f01-4bfb-92d3-a0cb47967963 |
Within the possible reports (1 = Rejected, 2 = Conditionally Approved, and 3 = Approved), as default if the parameter does not exist, only instruments with report = 3 are displayed.
To display also instruments with report = 2, this parameter must be filled out with 2/3, that is, the parameter content must be equal to the number (s) of instrument report (s) to be considered in the result, separated by / (slash) character.
1490d913-2873-4048-8b6f-66e6daa62f81Important: The parameter MV_QPLINS is considered while the parameter MV_QPVLIN is equal to S (Yes). |
Procedures
Entering instruments:
| 1. | Select Instruments folder and fill out fields according to field help instructions, paying attention to: |
| • | Instrument |
Enter the code of the Instrument concerning the measurement. [F3] is available to query Instrument Register.
When instruments are filled out in Product Specification Register, they are automatically listed by the system. You just need to select those instruments used in measurement.
| 2. | After filling out data, check and confirm them. |