It enables you to view pending loads in the branch, the deadlines and current status of transportation. The loading schedule is previously performed in the System, based on customer transport documents. You don't need to perform systematic operations to confirm a trip. You can also perform the schedule from the generated CTRC, but the view is from the customer transport documents.


Important:

  • You can perform the schedule with generic driver or vehicle;
  • You cannot perform the schedule if the vehicle has a trip.


Requirements

1. The Vehicle must be registered.


Procedures

1. In Loading Schedule, click Add.

2. Set and confirm Parameters.

The System displays all documents and vehicles for the loading schedule.

3. Select document and vehicle.

4. In Related Actions , click Route Suggestion.

5. Select the route and confirm it.

6. Enter Date and Time to generate the Loading Scheduling.

7. In Related Actions, click Confirm.

8. Set the Parameters and confirm.

9. Select the loading schedule and confirm it.

The System displays the Loading Schedule.

10. Check and Confirm the data.

11. Set the Parameters for Transport Bill of Lading generation.

The System displays the CTRC generation.

Important:

After confirmation, you can issue the Transport Bill of Lading.

If the lot is Electronic, all communication is performed through CT-e, so you can follow it by the Electronic Transport Bill of Lading Monitor.


See Also